Instructions – Simple and easy to understand:
 


 Step 1.
 Cleaning




 Thoroughly clean the surface to be coated with the
 enclosed cleaning agent and the sponge.
 Dry off well afterwards.

 


 Step 2.
 Secure against dripping

 Secure faucets and shower heads against dripping.
 Mask the edges of the surface to be coated with masking
 tape.

 



Step 3.
Mask Edges

 

Mask the edges of the surface to be coated with masking tape.

 
Step 4.
Mixing - STOP it

Put the Giorgin lacquer and powder into the dispenser tub and mix well with the enclosed spatula.  Now add the Giorgin hardener and mix well again for at least 1 minute.

 


Step 5.
Applying - STOP it
 

Now soak the enclosed roller well and apply the anti-slip coating evenly onto the surface to be coated.  DONE!  Remove the masking tape and leave the coated surface to harden for 12 hours.  NOTE: Temperature must be above 15o C / 59o