SlipCare Products
An Excerpt of the SlipCare® Product Range
| SlipCare®
"STOP it" - Kit |
 |
|
Anti-slide coating for any kind of bath and shower tubs - wood - plastic - PVC - tiles – metal and natural stone. One package of "STOP it" contains everything you need: a
sponge, a wooden spatula, a lacquer roller, a roller tub,
lacquer, hardener, powder and cleaning agent. The content of |
|
| SlipCare®
Primer - Kit |
|
| Primer for all dry and wet mineral surfaces
containing quartz, e.g. tiles, natural stone, absorbing surfaces
like concrete, wash floor and plaster.
SlipCare® Primer is available in small quantities of 100 ml with roller tub, mixing spatula and roller complementing our Stop it anti-slide coating.
|
|
| SlipCare® S2 Non-Skid Treatment |
 |
| For tiles and fine stoneware.
Depending on the absorbance capacity of the surface and the joint depth, one liter is enough to treat approx. 18 – 22 m² of tiles (anti-slide effect). A description of the application of our chemical anti-slide treatment is available at Non-Skid Treatment. Available in 1 liter bottles / 5 liter canisters. |
|
| SlipCare® S4 Non-Skid Treatment |
 |
| For glazed tiles and granite.
Depending on the absorbance capacity of the surface and the joint depth, one liter is enough to treat approx. 18 – 22 m² of tiles (anti-slide effect). A description of the application of our chemical anti-slide treatment is available at Non-Skid Treatment. Available in 1 liter bottles / 5 liter canisters. |
|
| SlipCare® S6 Non-Skid Treatment |
 |
| For unglazed tiles and concrete blocks.
Depending on the absorbance capacity of the surface and the joint depth, one liter is enough to treat approx. 18 – 22 m² of tiles (anti-slide effect). A description of the application of our chemical anti-slide treatment is available at Non Skid Treatment. Available in 1 liter bottles / 5 liter canisters. |
|
| SlipCare® Primer |
 |
| Consisting of 10 kg base and 3 kg of
hardener.
Primer for all dry and wet mineral surfaces containing quartz, e.g. tiles, natural stone, absorbing surfaces like concrete, wash floor and plaster. SlipCare® Primer prevents rising dampness and provides a secure hold for all coatings and lacquers applied to the surfaces after priming 1 kg of SlipCare® Primer is sufficient for approx. 20 m² of tile or granite surface and approx. 10 m² of concrete, plaster or other strongly absorbing surfaces. Depending on the temperature, the primed surface can be treated further after approx. 8-12 hours. |
|
| "STOP it" Non-Skid Coating |
 |
|
Large batches consisting of 10 kg base + 5 kg hardener and +
anti-slide structural grain.
SlipCare® "STOP it" Non-Skid coating for any kind of bath and shower tubs, can also be used wood, plastic, PVC, tiles, metal and natural stone. With "STOP it", you can coat approx 20 m² with 1 kg at a layer thickness of approx. 20 µm. |
|
| "STOP it 2" Non Coating |
 |
| For commercial floors in large batches
consisting of 10 kg base + 3 kg hardener + anti-slide structural
grain.
Stop it 2 is designed for especially heavy-duty sectors, e.g. in senior citizen's and nursing homes, hospitals, schools, laboratories, DIY markets and many other sectors with risk of slipping. Requires approx. 250gr/m² at an average layer strength of 100 µm. |
|
| SlipCare® S100 Special Impregnation |
  |
| Watery, solvent-free protective impregnation
largely prevents the penetration of fat, oil, water and dirt
into the flooring and also prevents stains.
Application: protective treatment for all absorbing floors made of ceramic tiles, cotto, terracotta, clay and brick slabs, many kinds of natural stone and concrete blocks as well as in kitchens and bathrooms, on windowsills and countertops. Notice: with fine stonework and polished marble, check for suitability first. Available in 1 liter / 0.5 liter bottles.
SlipCare® S10 Special Cleaner |
|
